NOTE: this page is for archival only, see the note at the end of the page.

rt2800pci

Driver for Ralink PCI devices RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052.

available devices

Please see the device list.

features

  • TODO

working

  • Monitor Mode
  • Station Mode
  • AP Mode
  • TX aggregation

not working yet

  • 11n support (mainly RX aggregation)

not supported

  • TODO

TODO

  • Beaconing needs to handle DTIM count and broadcast buffering (done)
  • Limit txpower by eeprom values to not send with more then 100% tx power (done)
  • Warning "invalid TX_STA_FIFO content" gets issued sometimes, maybe only in conjunction with tx aggregation? Needs investigation.
  • AMPDU RX aggregation
  • AMSDU RX aggregation (needs special handling since the hw already extracts the 802.3 frames out of the AMSDU and cuts of the 802.11 header)

device firmware

support

external links


This is a static dump of the old wiki, taken after locking it in January 2015. The new wiki is at https://wireless.wiki.kernel.org/.
versions of this page: last, v63, v62, v61, v60, v59, v58, v57, v56, v55, v54, v53, v52, v51, v50, v49, v48, v47, v46, v45, v44, v43, v42, v41, v40, v39, v38, v37, v36, v35, v34, v33, v32, v31, v30, v29, v28, v27, v26, v25, v24, v23, v22, v21, v20, v19, v18, v17, v16, v15, v14, v13, v12, v11, v10, v9, v8, v7, v6, v5, v4, v3, v2, v1