Go back –> Atheros Linux wireless drivers
wil6210 is the Wilocity 60 GHz 802.11ad driver.
Subscribe to this page!
You should subscribe to this page so you can get e-mail updates on changes and news for ath9k automatically. You'll get an e-mail as soon as this page gets updated.
Only monitor mode can be used right now.
- sniffer. Due to hardware limitation it captures either only CP (control PHY) or DP (data PHY) frames
- BSS between 2 peers. Both AP and managed modes supported. Single peer is hardware limitation. Iperf gives slightly above 1gbps
- P2P and FST flows
- after disconnect, upon 2-nd connect hardware goes crazy
- MSI interrupt
- various offloads
A slew of initial 802.11ad patches have been posted. The drivers needs quite a bit of work, but for those who have hardware and want to test the driver out in monitor mode you can use this release:
We need to get this publicly available...