Stable compat-wireless releases
This page is dedicated to the stable kernel compat-wireless releases. This started with the announcement of work for 2.6.30-rc series and will continue for all stable kernels releases. These stable releases are intended for users looking for more stability than what bleeding edge compat-wireless releases provide.
Case for support
Wireless vendors are encouraged to use these releases for support purposes as no extra tree needs to be created and supported. Stable fixes must always be sent upstream as well. This ensures wireless vendors are testing with stable kernels and helping stabilize the kernels further.
respective compat-wireless stable release
We recommend these the following userspace applications to be installed:
Building and installing
make sudo make install sudo make unload
To load the new shiny drivers either reboot or just modprobe the module you want. To test whether or not the new drivers are being picked up you can use modprobe -l on the modules, you should see the wireless modules being picked up using the updates/ directory instead of the kernel/ directory. For example:
$ for i in cfg80211 mac80211 ath9k; do modprobe -l $i; done /lib/modules/2.6.27-11-generic/updates/net/wireless/cfg80211.ko /lib/modules/2.6.27-11-generic/updates/net/mac80211/mac80211.ko /lib/modules/2.6.27-11-generic/updates/drivers/net/wireless/ath9k/ath9k.ko
Note that the make install command will output this for you so you can just look at that.
If you find a bug, please ensure you are on the latest kernel for that series. Bugs should be reported upstream on the http://bugzilla.kernel.org/. You may also want to address this on the linux-wireless mailing list first.
If you have a patch for an bug please also ensure you are using the latest release for the respective kernel. If unsure you can ask on the linux-wireless mailing list. If you are sure its a fix you can send the patches to:
To: email@example.com Cc: firstname.lastname@example.org