NOTE: this page is for archival only, see the note at the end of the page.

wpa_supplicant Linux documentation page

wpa_supplicant is a userspace application which works as a WPA supplicant and SME (to handle initiating MLME commands). This page is dedicated only to the documentation relating to the Linux aspects of wpa_supplicant. For further documentation please refer to:

Supported Linux wireless cards/drivers

  • Linux drivers that support Linux Wireless Extensions v19 or newer with WPA/WPA2 extensions
  • All Linux mac80211 drivers
  • Host AP driver for Prism2/2.5/3 (WPA and WPA2)
  • Linuxant DriverLoader with Windows NDIS driver supporting WPA/WPA2

  • Agere Systems Inc. Linux Driver (Hermes-I/Hermes-II chipset) (WPA, but not WPA2)
  • madwifi (Atheros ar521x)
  • Linux ndiswrapper
  • Broadcom wl.o driver
  • Wired Ethernet drivers


Please refer to the wpa_supplicant home page for release information


You can clone this tree:


If you have to use http you can also use:

For your convenience we have here a few shortcuts:

Developer's documentation

Mailing lists

Bugs / feature requests

If you want to make sure your bug report of feature request does not get lost, please report it through the bug tracking system as a new bug/feature request.

Setting the regulatory domain

You can add a line to your wpa_supplicant configuration file which specifies the ISO / IEC 3166 country code. This is available as of wpa_supplicant version 0.6.7.


Enabling control interface and nl80211 driver

New wpa_supplicant (as of commit cd27df100b from git) command line options

-o<driver> and -O<ctrl>

can now be used to override the parameters received in add interface command from dbus or global ctrl_interface. This can be used to enable a control interface when using NetworkManager or Connman or change the wpa_supplicant driver used.

The wpa_supplicant control interface is used by wpa_cli and wpa_gui to control wpa_supplicant. GUI applications use the DBUS service file to run wpa_supplicant with specific parameters. You can edit this file to take advantage of these new changes.

The wpa_supplicant service file is typically available on systems in the following location:


This service file typically looks like this:

[D-BUS Service]
Exec=/sbin/wpa_supplicant -u -f /var/log/wpa_supplicant.log

Change it as follows to enable usage of wpa_cli or wpa_gui and also to use nl80211 when available:

[D-BUS Service]
Exec=/sbin/wpa_supplicant -u -f /var/log/wpa_supplicant.log -onl80211 -O/var/run/wpa_supplicant

This is a static dump of the wiki, taken after locking it in January 2015. The new wiki is at
versions of this page: last, v16, v15, v14, v13, v12, v11, v10, v9, v8, v7, v6, v5, v4, v3, v2, v1