b43 and b43legacy
The b43 drivers (bcm43xx in mainline kernels, b43 and b43legacy in wireless-2.6 and 2.6.24 and later) are drivers for the 802.11 B/G family of wireless chips Broadcom produces.
All Broadcom chips require firmware that is loaded onto the wireless chip before it can operate. See below.
There are also USB devices based on Broadcom chips, these are not supported at all!
- bcm4303 (802.11b-only chips)
- all newer revisions supported (built after about Jan 2005)
- old revisions partially supported. Lacks some features like hw-crypto.
- bcm4311 rev 1 / bcm4312
- The 802.11a part of the 4309 and 4312 is not supported.
- bcm4311 rev 2
- There is no support for any Draft 802.11n features.
Please see the device list.
- Station mode
- Access Point mode (although not tested very well).
- Ad-Hoc (IBSS) mode
- Monitor and Promisc mode.
- "Monitor while operating" and multiple monitor interfaces.
- In-Hardware traffic de/encryption (relieves your CPU).
- LEDs to signal card state and traffic.
- In-Hardware MAC address filter.
- Probably something we forgot to add here.
not working yet
- Interference mitigation.
- Bluetooth coexistance (most code implemented, but untested)
- Probably something else that's not listed under "Works".
The Broadcom wireless chip needs software that runs on the wireless chip itself during operation. This software is called "firmware". Currently only Closed Source firmware is available that must be extracted from Broadcom's proprietary drivers. The driver files containing the officially supported b43 firmware are:
- Version 3 firmware: (For the SoftMAC based bcm43xx driver and b43legacy)
- Version 4 firmware: (For b43 driver):
You must extract the firmware out of these proprietary driver files by using the "fwcutter" tool. There are currently two versions of the tool, bcm43xx-fwcutter for the bcm43xx/bcm43xx-mac80211 driver and b43-fwcutter for the new b43 and b43legacy drivers.
Please note that the firmware from the binary drivers is Copyrighted by Broadcom Corporation and must not be redistributed.
- A tool for the modification of the Broadcom Sonics Silicon Backplane SPROM (e.g. you can permanently change the MAC address or the PCI IDs of your wireless card – useful on some (e.g. Compaq/HP) laptops where the BIOS checks these at boot.