Go back –> Atheros Linux wireless drivers
ath the shared module between Atheros wireless drivers. It contains any shared common code. It currently only contains the common shared regulatory code and one common harware helper but can be extended to contain anything seen shared between all drivers, both 802.11n or legacy 802.11abg devices. The ath modules is currently shared and used between ath5k, ath9k*, ath6kl_* and carl9170.
Here is the TODO list for the common shared code for Atheros modules.
- When the regpair is detected check first the currently set alpha2 and if the regpair matches a group that has that alpha2 use that alpha2 instead for the regulatory_hint().
- Test firmware upload on ar9271 and if it works as-is then share firmware upload code between ar9170 and ar9271 as currently the code is identical. There is one exception, the final command but we can probably just ignore the error code on that on ar9271 as well.
Atheros devices share the same regulatory implementation. All devices have a regulatory domain code programmed into their EEPROM. The programmed regulatory domain code can be of three kinds:
- custom world regulatory domains
programmed ISO-3166-1-numeric country code (with a few exemptions)
- a regulatory pair group number
Historically the Atheros regulatory domains have been mapped to groups as many regulatory domains share common definitions. Atheros regulatory domains used to be all embedded in the driver source code so space efficiency was important. To save space and to allow more diversity regulatory domains were allowed to be mapped to a 5 GHz group and a 2 GHz group. When a band was not supported a NULL group for the band was used. Each band group had a arbitrary group name, such as FCC3 or MKKA.
To better understand the nomenclatures used it helps to understand the conventions followed by the old Atheros regulatory group naming convention. Tendencies to follow "US" similar regulatory domains were given "FCC" prepend labels after the FCC, European regulatory domains used the "ETSI" prepend name after the ETSI, Asian countries tended to fit under "MKK" under the Japanese regulatory agency (I forget what this stands for), "APL" which I believe stands for "Asia, Pacific and Latin America". Numbers were appended at the end of each group label for 5 GHz groups, and letters for 2 GHz band group names.
Examples of 5 GHz regulatory band group names:
- WOR0 (World regulatory band definition 0)
- WOR4 (World regulatory band definition 4)
Examples of 2 GHz regulatory band group names:
- WORLD (there's only one 5 GHz group world regulatory domain)
Each band also had a set of world regulatory definitions.
Each regulatory band group had an attached set of frequency ranges along with regulatory flags for the channels. Band groups could be put together to form a regulatory domain, containing one 5 GHz regulatory domain group, and a 2 GHz regulatory domain group.
Examples of regulatory domain groups:
Programmed EEPROM regulatory domains codes would map to regulatory domain groups along with flags specific to that regulatory domain.
Each regulatory domain group would also have an equivalent Conformance Test Limit (CTL) group. There are 3 CTL groups:
- CTL_FCC = 0x10
- CTL_MKK = 0x40
- CTL_ETSI = 0x30
The CTL group is used internally by the driver to use the appropriate CTL index in the EEPROM to figure out the max regulatory EIRP. The CTL indexes always have a defined regulatory max EIRP and are programmed into the EEPROM. The CTL index maps frequency ranges to a specific max EIRP. This CTL index max EIRP is also used to ensure the device will not use an EIRP higher than should be used without damaging the card.
Customizing Atheros hardware
Vendors or manufacturers who may customize Atheros hardware may likely choose to enable their customers to use a wider range of frequencies or to use a higher max EIRP output. Certification would be done by these manufacturers and as such it is up to them to supply you with a custom regulatory database for its use. Typically a proprietary Linux driver would be provided with a customized "HAL" which allows more frequencies or higher EIRP. Since the upstream Linux drivers do not rely on a "HAL" anymore for regulatory purpose and instead rely on CRDA, manufacturers who customize hardware could simply just provide custom signed regulatory databases and a custom CRDA instead of providing a completely separate driver.
For details as to how to achieve a custom regulatory wireless-regdb and public key see the Custom_regulatory_information guidelines.
The 0x0 regulatory domain
The 0x0 value of a regulatory domain is to be used by Atheros devices to map to the "US", always. This is as per Atheros documentation to manufacturers. Manufacturers wanting to enable users to use cards as "region free" should supply their own builds of CRDA and a signed regulatory database.
For more details you can refer to this thread:
EEPROM world regulatory domain
Atheros EEPROM can use 12 custom world regulatory domains:
- WOR0_WORLD = 0x60
- WOR1_WORLD = 0x61
- WOR2_WORLD = 0x62
- WOR3_WORLD = 0x63
- WOR4_WORLD = 0x64
- WOR5_ETSIC = 0x65
- WOR01_WORLD = 0x66
- WOR02_WORLD = 0x67
- EU1_WORLD = 0x68
- WOR9_WORLD = 0x69
- WORA_WORLD = 0x6A
- WORB_WORLD = 0x6B
0x60, 0x61, 0x62, 0x66, 0x67, 0x68 are only used today moving forward for 2.4 GHz-only band cards.
EEPROM ISO-3166-1-numeric code
The Atheros EEPROM regulatory domain can contain an ISO-3166-1-numeric country code. This may or not match the exact ISO3166-1-numeric country code, but usually does. Because it may not always match for the new regulatory infrastructure used in Linux we map the country to the ISO-3166-alpha2 country code.
Examples of possible country code numbers a card EEPROM can be programmed with:
- CTRY_INDONESIA = 360
- CTRY_IRAN = 364
- CTRY_IRAQ = 368
- CTRY_IRELAND = 372
- CTRY_ISRAEL = 376
- CTRY_ITALY = 380
- CTRY_JAMAICA = 388
When a country regulatory domain is used in the EEPROM the card will also have the COUNTRY_ERD_FLAG (0x8000) set to indicate the EEPROM has a country code. Without this the assumption is a regulatory pair group has been programmed in the EEPROM.
EEPROM regulatory pairs
The Atheros EEPROM can use a regulatory pair group. Examples of regulatory pair groups:
- MKK1_MKKA = 0x40
- ETSI1_WORLD = 0x37
- FCC1_FCCA = 0x10
- WOR02_WORLD = 0x67
The old way
The old way was to define all band groups (5 GHz and 2 GHz) in the driver code. Each band group would have a set of defined frequency ranges. ((this documentation section could be extended further))
The new way
We have extracted the regulatory domain definitions per ISO3166-alpha2 and converted them to human legible ASCII text file, used by the new Linux regulatory infrastructure. Each country therefore has a db.txt entry such as:
country EC: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 20), (6, 17) (5250 - 5330 @ 20), (6, 23), DFS (5735 - 5835 @ 20), (6, 30)
The custom regulatory domains are kept statically as part of the driver. The custom regulatory domains are the 12 custom world regulatory domains.
Regulatory pair regulatory domains are mapped to the first ISO-3166-alpha2 country.
The device programmed EEPROM is read. We then determine if the regulatory domain code is a country regulatory domain COUNTRY_ERD_FLAG (0x8000) or a regulatory pair. Based on that, we determine whether we use an ISO3166-alpha2 country code for a regulatory_hint() or we use a static world regulatory domain.
In case of the absence of CRDA and because the kernel still has CONFIG_WIRELESS_OLD_REGULATORY (although deprecated) the ath module pre-initializes the wiphy channels to apply the default world regulatory domain (0x64). This is done done in ath_regd_init_wiphy() by using the cfg80211 provided wiphy_apply_custom_regulatory(). This is done because CONFIG_WIRELESS_OLD_REGULATORY is still present upstream and if not done would allow even "JP" channels to be used on cards designed for the "US". Also, although the static world regulatory domain in cfg80211 is sufficient for complete world compliance Atheros has always supported a 5 GHz band which is a little more extended. The world regulatory domain is computed dynamically on a regular basis by using the intersection of all regulatory domains. Code for computing this can be found on intersection.c. This currently produces a 5 GHz band supporting the frequency ranges:
5170-5250 Channels [36-48] 5735-5835 Channels [149-165]
While Atheros' default world regulatory domain covers:
5140-5360 Channels [36-64] 5715-5860 Channels [149-165]
An Atheros world roaming card would then support channels 52, 56, 60, and 64 when world roaming, but by also enabling passive scan, no beaconing and requiring radar detection on them as well. The number of allowed HT40 channels would also increase to:
5180 HT40 + 5200 HT40 -+ 5220 HT40 -+ 5240 HT40 -+ 5260 HT40 -+ 5280 HT40 -+ 5300 HT40 -+ 5320 HT40 -
This happens when your card has a world roaming regulatory domain. It should be also noted that if your card is world roaming your card will also remove passive-scan flag and no-beaconing flag restrictions if an AP is found locally on a channel and DFS is not required on that channel on the 5 GHz band.