acx100 was a project started by Andreas Mohr to create a free open source driver for the acx100 chipset from Texas Instruments. Later produced acx111 chipsets, which can be found on PCI, PCMCIA or USB devices, are also supported.
Currently, the driver is working quite reliably, but it does not support WPA encryption and uses a home-grown wireless stack. The main focus of development is now the port to the mac80211 kernel stack. This mac80211 port is still in alpha status, but there have even been some success reports of it working.
A complete list of devices known to work with acx1xx can he found on the acx100 wiki
not working yet
All devices require propietary firmware images to work. The wiki should give you a good point to start on which firmware to choose and where to get it. All currently available firmware versions can be found at http://acx100.erley.org/fw/.