NOTE: this page is for archival only, see the note at the end of the page.

acx1xx

acx100 was a project started by Andreas Mohr to create a free open source driver for acx100 chipsets from Texas instruments. Later produced acx111 chipsets are also covered by this work. At the current point the driver is working quite reliable and is ported to the mac80211 WLAN stack by a guy named Jeff. These chipsets can be found in many devices from PCI over PCMCIA to USB.

supported chips

acx100
this driver should pretty much work with mac80211
acx100usb
this driver does not work yet
acx111
this driver should pretty much work with mac80211

available devices

A complete list of devices known to work with acx1xx can he found in the acx100 wiki

If you put lists here like bcm43xx does it's far easier for people to find out about this driver since it'll be listed on en/users/Devices/PCI and en/users/Devices/USB.

features

TODO

working

  • TODO

not working yet

  • TODO

not supported

  • TODO

device firmware

You need to get a firmware to actually use the device. The wiki should give you a good point to start on which firmware to choose and where to get it.

external links


This is a static dump of the old wiki, taken after locking it in January 2015. The new wiki is at https://wireless.wiki.kernel.org/.
versions of this page: last, v7, v6, v5, v4, v3, v2, v1