NOTE: this page is for archival only, see the note at the end of the page.

Download latest Linux wireless drivers

You can now download a package which lets you compile and install the latest advances on the Linux wireless subsystem and get some of our latest drivers without having to recompile your entire kernel. This package adds mac80211, mac80211 drivers, and any new FullMAC driver which has had fairly recent updates.

If you'd like to keep the wireless-testing.git repository local as well, please read out git-guide which explains how to achieve this. With a local git repository you can update the compatibility package yourself. For more information on how to do this please refer the Developers section below. Please keep in mind though that if you do this it is advised you start your compat-wireless-2.6 tree through the git tree that holds it. This way if changes are made to add support for a new driver of a new compatibility feature all you need to do is pull from the repository (git-pull). Please read Checking out compat-wireless-2.6.git tree section for details on how to do this.

Compat-wireless release types

We have a few types of compat-wireless releases. This page is dedicated to follow always the bleeding edge, which to us means following the wireless-testing tree. Please refer to these other links for the other compat-wireless releases.

Requirements for bleeding edge

You need two things:

  • A Kernel >= 2.6.27

  • Your kernel headers installed

Please be very sure you have your kernel headers installed before reporting any sort of build issues with this package. This usually will mean having this symlink point to a valid directory with kernel headers in it:

/lib/modules/`uname -r`/build

The exception to this is if you are building the package targeting a kernel you are not running. Users doing this should read the Building for external kernels section.

Additionally, the kernel you're building for needs a valid ".config" file, if it isn't present compat will assume you have PCI, USB and PCMCIA built into your kernel and if not, fail building.

We recommend these the following userspace applications to be installed:

Linux wireless version table

The following is the latest release versions for code taken from wireless-testing.git and on compat-wireless.git. This is updated automatically every day. The version represents the git-describe output.

wireless-testing.git: <<CurrentWirelessTesting>>

compat-wireless.git: <<CurrentCompatVersion>>

Where to download bleeding edge

You can get bleeding edge compat-wireless here:

This package is updated daily. It reflects the latest on wireless-testing.git tree.

Directly downloading the tarball

We have enabled anti-hotlinking to the compat-wireless-2.6.tar.bz2 tarball. This ensures users directed to this tarball from random tutorials online will hopefully read this page. Anti-hotlinking prevents users from accessing the tarball directly before seeing this page. In summary, you cannot directly (for example using wget) this tarball before having viewed this introductory page. If you try to do so you will be redirected here. You can, however, directly download a dated version of the tarball, for example compat-wireless-2008-03-25.tar.bz2.

You can find the latest dated tarball in the compat-wireless-2.6 download directory.

Archive of compat-wireless-2.6 tarballs only hosts the latest dated compat-wireless-2.6 tarball but if you would like an older release please check the compat-wireless-2.6 archive, which is hosted by Orbit.

Selecting your driver

If you know what driver you want you can use driver-select:


Selecting your driver can reduce the amount of time to compile compat-wireless. If you want to restore compat-wireless to enable all drivers again you can use:

./scripts/driver-select restore

If you do not see your driver in the supported list it means care has not been taken to ensure it works with driver-select and you must just build compat-wireless as a whole.

Building and installing


Extract the content of the package:

tar jxvf compat-wireless-$(date -I).tar.bz2


Build the latest Linux wireless subsystem:

cd compat-wireless-$(date -I)


We use the updates/ directory so your distribution's drivers are left intact. By default depmod will search this directory first, but if you find that it does not then check that your depmod.conf file lists the search order correctly with updates appearing first (before built-in).

sudo make install


This nukes our changes to updates/ so you can go back to using your distribution's supported drivers.

sudo make uninstall


Since you might be replacing your old mac80211 drivers you should first try to unload all existing mac80211 and related drivers. Note also that broadcom, zydas, and atheros devices have old legacy drivers which you need to be sure are removed first. We provide a mechanism to unload all old and legacy drivers first so you should run to be sure:

sudo make unload


Before loading modules you must first unload your old wireless subsystem modules. Read above how to do this. If you know what module you need you can simply load the module using modprobe. If you simply are not sure you can use, just reboot the box.


We tend to carry all new drivers or any drivers worth getting updates for. For a list of all current Linux wireless drivers see our Drivers page.

Known issues

If MadWifi is present the build system will detect this and disable it. It does this by simply renaming ath_pci.ko to ath_pci.ko.ignore. This lets us disable the MadWifi driver without blacklisting it which could cause issues with users later. If you would like to enable MadWifi at a later time and disable ath5k you can run:

sudo athload madwifi

To revert back to ath5k you can run:

sudo athload ath5k

Why was this work done?

It was done for users or developers stuck on older kernels that want to help test or patch wireless work. Additionally if you're on a recent kernel this lets you get the latest and greatest wireless-2.6 git work without much effort. This may mean new drivers for some users. Last but not least we hope this will encourage vendors and developers to post patches upstream first rather than forking or maintaining their own mac80211 releases with their own patches for their own drivers.

  • Firmware:

If your driver needs firmware please be sure to check the driver page for that driver.

What's the difference between compat-wireless-2.6 and John Linville's tree?

This package is based on John's tree, we just add compatibility support for older kernels.

Getting compat-wireless on Ubuntu

With Ubuntu you have the option of either installing compat-wireless yourself or of installing the package that provides it built by the Ubuntu kernel team. The Ubuntu package that carries compat-wireless is called linux-backport-modules and it has more backported modules than just your wireless subsystem. Its updated whenever major updates are pushed out into the wireless-testing git tree.

# For Ubuntu 8.10 Intrepid users:
sudo apt-get install linux-backports-modules-intrepid

# For Ubuntu 9.04 Jaunty users:
sudo apt-get install linux-backports-modules-jaunty

Please note that if you are installing linux-backports-modules-intrepid and you later decide to install compat-wireless by building it by yourself you are highly encouraged you first remove linux-backports-modules-intrepid first otherwise you can run into module dependency conflicts.

Building for external kernels

If you have a kernel you do not have installed but yet want to build the compat-wireless-2.6 drivers for it you can use this syntax:

make KLIB=/home/mcgrof/kernels/linux- \


If you've found a bug please report it to our linux-wireless mailing list:

Report the bug because you are working with the latest and greatest. If your bug is compatibility-related then we should still try to fix it within the compat.[ch] work.


wireless-testing ChangeLog

See the wireless-testing ChangeLog to see the list of latest changes to all wireless drivers, the wireless core and mac80211. Since this package is based on the wireless-testing.git latest means patches which John has accepted today!

compat-wireless ChangeLog

See the compat-wireless-2.6 ChangeLog to view changes made necessary in order to keep advancing this package.


This work is a subset of the Linux kernel as such we keep the kernel's Copyright practice. Some files have their own copyright and in those cases the license is mentioned in the file. All additional work made to building this package is licensed under the GPLv2.


Hacking on compat-wireless-2.6

General kernel compatibility now goes into a separate tree, the general kernel compatibility tree:


The point of the compat git tree is to build a general kernel compatibility layer which can be shared amongst different compatibility projects, compat-wireless is just one of them. You will need compat.git to get the compat and compat_firmware_class modules.

Anything that is not general kernel compatibility but instead specific to 802.11 or bluetooth goes into compat-wireless.git.

If you have your own linux-next.git tree, before running be sure to set your GIT_TREE variable and COMPAT_TREE variable. For example:

export GIT_TREE=/home/user/wireless-testing/
export COMPAT_TREE=/home/users/compat.git/

Then you can update your local sources based on these linux-next.git and compat.git:

scripts/   - Cleans the compat-wireless-2.6 tree
scripts/  - Updates compat-wireless-2.6 with your git tree
scripts/ - Does the above two

Please try adding new drivers, test them and if they work enable them. You can then send patches.


The way compat-wireless releases are made, where they are kept are detailed in the compat-wireless admin page.


  • Dialog (make menuconfig) option for this package

Patches for compatibility work

Please send patches against


To: Luis R. Rodriguez <>
Subject: [PATCH] compat-2.6: fix foo

Checking out compat-wireless-2.6.git tree

If you have a local wireless-testing.git tree already you can just check out the compat-wireless-2.6.git tree yourself and make updates manually. To checkout the compat-wireless-2.6.git tree you do:

git-clone git://

Every now and then you want to pull to get the latest updates:

cd compat-wireless-2.6/

Patches for drivers

If you'd like to send patches for a driver though you can send it using our Submitting Patches guidelines. Please note that some patches applied onto wireless-testing can be applied onto compat-wireless-old, they just need to be backported. Help with this is greatly appreciated.

This is a static dump of the wiki, taken after locking it in January 2015. The new wiki is at
versions of this page: last, v123, v122, v121, v120, v119, v118, v117, v116, v115, v114, v113, v112, v111, v110, v109, v108, v107, v106, v105, v104, v103, v102, v101, v100, v99, v98, v97, v96, v95, v94, v93, v92, v91, v90, v89, v88, v87, v86, v85, v84, v83, v82, v81, v80, v79, v78, v77, v76, v75, v74, v73, v72, v71, v70, v69, v68, v67, v66, v65, v64, v63, v62, v61, v60, v59, v58, v57, v56, v55, v54, v53, v52, v51, v50, v49, v48, v47, v46, v45, v44, v43, v42, v41, v40, v39, v38, v37, v36, v35, v34, v33, v32, v31, v30, v29, v28, v27, v26, v25, v24, v23, v22, v21, v20, v19, v18, v17, v16, v15, v14, v13, v12, v11, v10, v9, v8, v7, v6, v5, v4, v3, v2, v1