NOTE: this page is for archival only, see the note at the end of the page.

Glossary

Terms we use throughout the wiki you should become familiar with

BSS

BSS stands for Basic Service Set. The coverage of an access point is called a BSS.

cfg80211

Kernel side of configuration management for wireless devices. Works together with FullMAC, mac80211, and nl80211.

CLI

CLI stands for Command Line Interface. These are utilities you can run in the console or terminal emulator.

FullMAC

FullMAC is a term used to describe a type of wireless card where the MLME is managed in hardware. You would not use mac80211 to write a FullMAC wireless driver.

git-describe

git-describe is a git command. It outputs something like this:

<<CurrentWirelessTesting>>

The first part is the tag for the current release. The second part is the number of patches which have been applied since the tag was applied. The last part, after the first g is the SHA1 commit ID of the last commit applied.

IBSS

IBSS stands for Independent Basic Service Set. Its basically Ad-Hoc mode. See

http://en.wikipedia.org/wiki/Independent_Basic_Service_Set

Information Element

An Information Element (IE) is a part of management frames in the IEEE 802.11 wireless LAN protocol. IEs are a device's way to transfer descriptive information about itself inside management frames. There are usually several IEs inside each such frame, and each is built of Type-length-value (TLVs).

The common structure of an IE is as follows:

 ←  1  �' ←  1   �' ←     1-255     �'
+-------+--------+-----------------+
| Type  | Length |     Data        |
+-------+--------+-----------------+

Whereas the vendor specific IE looks like this:

 ←  1  �' ←  1   �' ←        4        �' ←  1-251   �'
+-------+--------+-------------------+------------+
|  221  | Length |        OUI        |     Data   |
+-------+--------+-------------------+------------+

iw

iw is a new nl80211 based CLI configuration utility for wireless devices.

nl80211

User-space side of configuration management for wireless devices. It is a Netlink-based user-space protocol. Several user-space applications are available which utilize nl80211.

mac80211

See SoftMAC.

MLME

MLME Stands for Media Access Control (MAC) Sublayer Management Entity. MLME is the management entity where the Physical layer (PHY) MAC state machines reside. Examples of states a MLME may assist in reaching:

  • Authenticate
  • Deauthenticate
  • Associate
  • Disassociate
  • Reassociate
  • Beacon
  • Probe

mac80211's MLME management implementation is currently handled by net/mac80211/ieee80211_sta.c. This handles only the STA MLME

PHY

physical-layer controller

SoftMAC

SoftMAC is a term used to describe a type of wireless card where the MLME is expected to be managed in software. mac80211 is a driver API for SoftMAC wireless cards, for example.

SSID

SSID stands for Service Set IDentifier. The SSID is a code attached to all packets on a wireless network to identify each packet as part of that network. The code consists of a string of 1-32 octets (usually represented as case sensitive alphanumeric characters).

http://en.wikipedia.org/wiki/SSID

Station (STA)

Station (or STA) is the generic term for a device with a radio that can communicate with other stations in a wireless network. Common forms of a station are access points (AP), computers, or phones.

http://en.wikipedia.org/wiki/Station_(networking)

WE

WE stands for Wireless-Extensions - the old driver API and user <�"> kernel communication transport.

WIPHY

Wireless PHY.


This is a static dump of the wiki, taken after locking it in January 2015. The new wiki is at https://wireless.wiki.kernel.org/.
versions of this page: last, v22, v21, v20, v19, v18, v17, v16, v15, v14, v13, v12, v11, v10, v9, v8, v7, v6, v5, v4, v3, v2, v1